Universal Air Cooled Condensers
Fin Geometries : 32 mm x 28 mm
Copper tubes Ø 1/2""
V type aluminium fins.
The finned coils are designed with aluminium fins spaced at 2,1 or 2,5 mm, crimped onto copper tubes.
Header inlet and outlet tube connections made of copper.
Maximum operating pressure 21 bar.
Staggered copper tubes.
The coil circuit are designed for refrigerants R404A, R507C, R22, R134A, R407C.
Delivering under positive pressure.
Electrostatic powder coated RAL 9016 galvanized steel.
Galvanized steel or aluminium.
Each fan chamber is seperated by internal baffle plates to prevent induced wind milling off-cycle fans.
Ø500 - Ø630 - Ø800 mm/ 230V 1~ 50Hz Monofaze 800, 1250 d/d or 400 V ~ 50Hz Trifase 650, 900 d/d fans.
Selections should be confirmed by your Buzçelik Technical Specialist.
Standard or low noise level are available.
Different kinds of motors available as optional. (EC or AC)
Motor protection IP54 insulation class F.
Different kinds of accessories available as optional. (FlowGrid etc.)
Working conditions - 40°C /+ 50°C.
The nominal capacities calculated according to Eurovent EN 328 standards that refer to ΔT = 15°C conditions and are valid for R404A."